SISCUT-4 Two Output Electronic Earthquake Sensor with Led Display

• Stand by current draw: 30mA
• Battery capacity: 12VDC / 2.2Ah
• Battery operating time (at stand by): 24 hours
• Battery pull feature: Automatic
• Working ambient temperature: 0 to +51.5º C
• Mounting position: 0° horizontally
• Battery warning voltage: 11.85 VDC(±5%)
• Dimensions: 185mm*180mm*90mm
• Weight: 2.7 Kg
• Dry Contact N/O – N/C: Additional Contacts are installed upon request to be used in Elevator, Generator, Electricity, Fire Panel etc… systems.

Indicator and Alarm Features

• Earthquake alarm: Light indicator and sound
• Mains operation indicator: Light indicator
• Battery operation indicator: Light indicator
• Battery Bad or insufficient: Light indicator and audible. The battery test performed automatically by the device is repeated for 1 day. During this period, if the batteries cannot exceed 11,85V, it will give an audible warning once every 5 seconds and the battery led on the light indicator will flash.
• S.Valve failure or line break warning: Light indicator and audible. If there is a fault in the solenoid valve coil or a disconnection in the connection to the valve, the S.Vana led will blink continuously and give an audible warning once every second.
• Battery automatic charging feature.
• Alarm reset feature: Manually with the reset button.
• Shock, vibration, etc. after closing. Even if the mounting axis is disturbed by the effects, it does not return to the initial position, it maintains the alarm status until it is manually reset.
• Truck, Dozer, Train, Plane, Cylinder etc. It is not affected by the operation of vehicles that can vibrate the ground, it works with the mass movement of the ground.